Inland Empire Driveline Service - IEDLS Online Driveshaft Store

CF 6769-350

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #CF 6769-350

UPC00887753252319

UseCamaro

Description3 inch aluminum shaft, stock length, includes transmission yoke.

ApplicationsCF6769 Camaro with TH350 transmission.

Price$468.13

Add to Cart

Array
(
    [id] => 15
    [application] => Camaro
    [category] => 1
    [model_options] => 0
    [part_number] => CF 6769-350
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 13
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_15.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => CF6769 Camaro with TH350 transmission.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252319
    [d-2] => 
    [description] => 3 inch aluminum shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705009906
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

CF6769-400

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #CF6769-400

UPC00887753252326

UseCamaro

Description3 inch aluminum shaft, stock length, includes transmission yoke.

Applications67 - 69 Camaro with 400 Transmission

Price$468.13

Add to Cart

Array
(
    [id] => 16
    [application] => Camaro 
    [category] => 1
    [model_options] => 0
    [part_number] => CF6769-400
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 14
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_16.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 67 - 69 Camaro with 400 Transmission
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252326
    [d-2] => 
    [description] => 3 inch aluminum shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705009960
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

CF 6769-4SPD

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #CF 6769-4SPD

UPC00887753252333

UseCamaro

Description1967 to 1969 Camaro, 3 inch aluminum driveshaft, 4 speed, stock length, includes transmission yoke.

Applications67 - 69 Camaro with 4 Speed Transmission

Price$468.13

Add to Cart

Array
(
    [id] => 17
    [application] => Camaro
    [category] => 1
    [model_options] => 0
    [part_number] => CF 6769-4SPD
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 15
    [iedls_part_number] => 
    [photos] => [{"photo":"images/3-inch aluminum.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 67 - 69 Camaro with 4 Speed Transmission
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252333
    [d-2] => 
    [description] => 1967 to 1969 Camaro, 3 inch aluminum driveshaft, 4 speed,  stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705009990
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

CF 8200

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #CF 8200

UPC00887753252340

Use1982 to 2001 Camaro

Description3 inch aluminum shaft, stock length, includes transmission yoke.

Applications82 - 01 Camaro / Firebird Automatic & Manual Transmission

Price$468.13

Add to Cart

Array
(
    [id] => 18
    [application] => 1982 to 2001 Camaro
    [category] => 1
    [model_options] => 0
    [part_number] => CF 8200
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 16
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_18.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 82 - 01 Camaro / Firebird Automatic & Manual Transmission
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252340
    [d-2] => 
    [description] => 3 inch aluminum shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705010028
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

IC 94-96C

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #IC 94-96C

UPC00887753252395

UseImpala / Caprice

DescriptionIC9496C Aluminum Driveshaft Firebird 28 1994 to 1996 impala and caprice stock replacement 3.5 inch aluminum driveshaft stock length

Applications94-96 Impala / Caprice 3.5" OD Aluminum Driveshaft

Price$596.30

Add to Cart

Array
(
    [id] => 20
    [application] => Impala / Caprice
    [category] => 1
    [model_options] => 0
    [part_number] => IC 94-96C
    [price] => 596.30
    [price_backup] => 551.05
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 18
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 94-96 Impala / Caprice 3.5" OD Aluminum Driveshaft
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252395
    [d-2] => 
    [description] => IC9496C	Aluminum Driveshaft Firebird	28	1994 to 1996 impala and caprice stock replacement 3.5 inch aluminum driveshaft stock length
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705010071
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

ALUGN

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #ALUGN

UPC00887753252289

UseWith Transmission Yoke

Applications84-87 Grand National 3.5" OD Aluminum Driveshaft for High Speed/High Horsepower Applications

Price$620.15

Add to Cart

Array
(
    [id] => 21
    [application] => With Transmission Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => ALUGN
    [price] => 620.15
    [price_backup] => 573.09
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 28
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_21.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 84-87 Grand National 3.5" OD Aluminum Driveshaft for High Speed/High Horsepower Applications
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252289
    [d-2] => 
    [description] => 
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705010101
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-31-31-83C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-31-31-83C

UPC00887753253194

Use500 HP and lower. Complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires

ApplicationsCustom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires

Price$425.77

Add to Cart

Array
(
    [id] => 22
    [application] => 500 HP and lower. Complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-31-31-83C
    [price] => 425.77
    [price_backup] => 393.46
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 20
    [iedls_part_number] => SK-31-31-83C
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253194
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1310 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use Up to 500 HP with Street Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705010140
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-83C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-83C

UPC00887753253224

UseOver 500 HP Complete with Trans. Yoke, can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCustom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Price$456.98

Add to Cart

Array
(
    [id] => 23
    [application] => Over 500 HP Complete with Trans. Yoke, can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-30-83C
    [price] => 456.98
    [price_backup] => 422.30
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 24
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253224
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705010175
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-95C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-95C

UPC00887753253248

UseOver 500 HP Complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCustom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Price$529.75

Add to Cart

Array
(
    [id] => 24
    [application] => Over 500 HP Complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-30-95C
    [price] => 529.75
    [price_backup] => 470.71
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 25
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253248
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705010212
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-83CRC

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-83CRC

UPC00887753253255

UseOver 500 HP compete with Trans. Yoke can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCustom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Price$681.74

Add to Cart

Array
(
    [id] => 25
    [application] => Over 500 HP compete with Trans. Yoke can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-30-83CRC
    [price] => 681.74
    [price_backup] => 630.00
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 26
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253255
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .083 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705010246
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-35-83C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-35-83C

UPC00887753253279

UseOver 500 HP complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke

Applications1350 3.5" custom 3.5in. 1350 .083 wall Steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires .

Price$488.18

Add to Cart

Array
(
    [id] => 27
    [application] => Over 500 HP complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-35-83C
    [price] => 488.18
    [price_backup] => 451.14
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 30
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" custom 3.5in. 1350 .083 wall Steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires .
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253279
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Steel Driveshaft with Transmission Yoke
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705010281
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-35-65C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-35-65C

UPC00887753253262

UseOver 500 HP complete with Trans. Yoke

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .065 Wall Steel Driveshaft with Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. for More Than 500 HP with Any Tires

Applications1350 3.5" custom 3.5 in. 1350 .065 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires

Price$507.73

Add to Cart

Array
(
    [id] => 28
    [application] => Over 500 HP complete with Trans. Yoke
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-35-65C
    [price] => 507.73
    [price_backup] => 451.14
    [subcategory] => 2
    [weight] => 40
    [orderNum] => 31
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" custom 3.5 in. 1350 .065 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. Use for more than 500 hp with any tires
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253262
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .065 Wall Steel Driveshaft with Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705010316
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IC 94-96D

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #IC 94-96D

UPC00887753252401

UseImpala/Caprice

Description1994 to 1996 Impala and Caprice stock replacement 3.5 inch aluminum driveshaft stock length plus one half inch. use with aftermarket trailing arms.

Applications94-96 Impala/Caprice 3.5" OD Aluminum Driveshaft .1/2" Longer than Original-High Speed/High Horsepower Applications

Price$596.30

Add to Cart

Array
(
    [id] => 30
    [application] => Impala/Caprice
    [category] => 1
    [model_options] => 0
    [part_number] => IC 94-96D
    [price] => 596.30
    [price_backup] => 551.05
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 27
    [iedls_part_number] => 
    [photos] => [{"photo":"images/3_5 aluminum.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 94-96 Impala/Caprice 3.5" OD Aluminum Driveshaft .1/2" Longer than Original-High Speed/High Horsepower Applications
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252401
    [d-2] => 
    [description] => 1994 to 1996 Impala and Caprice stock replacement 3.5 inch aluminum driveshaft stock length plus one half inch. use with aftermarket trailing arms.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705010353
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

58-64 LR

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #58-64 LR

UPC00887753252104

Use500 HP and Lower 58-64 Chevy

DescriptionThis "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.

Applications58-64 Chevy and 58 to 72 Chevy and GMC Trucks

Price$814.98

Add to Cart

Array
(
    [id] => 31
    [application] => 500 HP and Lower 58-64 Chevy 
    [category] => 1
    [model_options] => 0
    [part_number] => 58-64 LR
    [price] => 814.98
    [price_backup] => 648.90
    [subcategory] => 2
    [weight] => 50
    [orderNum] => 231
    [iedls_part_number] => 
    [photos] => [{"photo":"images/complete replacement.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 1
    [a] => 
    [applications] => 58-64 Chevy and 58 to 72 Chevy and GMC Trucks
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252104
    [d-2] => 
    [description] => This "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705010472
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IE 502

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IE 502

UPC00887753252432

UseOver 500 HP 58 - 64 Chevy

DescriptionThis Custom 1350 3.0 In. Diameter Shaft Set for 58-64 Chevrolets is Used with More Than 500 HP and Any Tires. It Features Our Polyurethane Center Support and Telescoping Rear Shaft. It Arrives Fully Assembled, Balanced and Ready to Install.

ApplicationsThese shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks. This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-6 Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.

Price$916.98

Add to Cart

Array
(
    [id] => 32
    [application] => Over 500 HP 58 - 64 Chevy
    [category] => 1
    [model_options] => 0
    [part_number] => IE 502
    [price] => 916.98
    [price_backup] => 768.05
    [subcategory] => 2
    [weight] => 60
    [orderNum] => 232
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom shaft.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 1
    [a] => 
    [applications] => These shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks.  This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-6 Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252432
    [d-2] => 
    [description] => This Custom 1350 3.0 In. Diameter Shaft Set for 58-64 Chevrolets is Used with More Than 500 HP and Any Tires. It Features Our Polyurethane Center Support and Telescoping Rear Shaft. It Arrives Fully Assembled, Balanced and Ready to Install.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705010563
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

58-64 RSNB

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #58-64 RSNB

UPC00887753252609

UseRear Shaft

DescriptionAn "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It Should be used with 7075-T6 Aluminum Bearing Support. This shaft is included with our 58 - 64 RS kit. The Rear Shaft kit can be special ordered for trucks.

Price$329.54

Add to Cart

Array
(
    [id] => 33
    [application] => Rear Shaft 
    [category] => 1
    [model_options] => 0
    [part_number] => 58-64 RSNB
    [price] => 329.54
    [price_backup] => 304.53
    [subcategory] => 2
    [weight] => 23
    [orderNum] => 233
    [iedls_part_number] => 
    [photos] => [{"photo":"images/58-64 chevy.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252609
    [d-2] => 
    [description] => An "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It Should be used with 7075-T6 Aluminum Bearing Support. 
This shaft is included with our 58 - 64 RS kit.
The Rear Shaft kit can be special ordered for trucks.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705010617
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

ALU-1310KP

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1310KP

UPC00887753252142

UseThe Show Stopper

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1310 3 in. aluminum driveshaft w/transmission yoke Polished with Chrome u-joints. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. use with up to 500 hp with street tires.

Price$1005.05

Add to Cart

Array
(
    [id] => 71
    [application] => The Show Stopper
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1310KP
    [price] => 1005.05
    [price_backup] => 914.64
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 70
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1310 3 in. aluminum driveshaft w/transmission yoke Polished with Chrome u-joints. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252142
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705014575
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1330-3.5C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1330-3.5C

UPC00887753252173

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1330 in. 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.

Price$611.60

Add to Cart

Array
(
    [id] => 72
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1330-3.5C
    [price] => 611.60
    [price_backup] => 551.05
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 72
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1330 in. 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252173
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705014622
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1330-C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1330-C

UPC00887753252180

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1330 in. 4 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.

Price$650.61

Add to Cart

Array
(
    [id] => 73
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1330-C
    [price] => 650.61
    [price_backup] => 587.10
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 73
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1330 in. 4 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252180
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705014662
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1350C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350C

UPC00887753252234

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsCustom 1350 in. 3.5 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.

Price$611.60

Add to Cart

Array
(
    [id] => 74
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1350C
    [price] => 611.60
    [price_backup] => 556.04
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 74
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1350 in. 3.5 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252234
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705014714
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1350-4-C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350-4-C

UPC00887753252210

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsCustom 1350 in. 4 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.

Price$622.75

Add to Cart

Array
(
    [id] => 75
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1350-4-C
    [price] => 622.75
    [price_backup] => 561.35
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 75
    [iedls_part_number] => 
    [photos] => [{"photo":"images/3_5 aluminum.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1350 in. 4 in. aluminum driveshaft w/ transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 60 inches long u-joint c/l to c/l. Use with over 500 hp with any tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252210
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705014759
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1310-C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1310-C

UPC00887753252135

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1310 3 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.

Price$483.43

Add to Cart

Array
(
    [id] => 76
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1310-C
    [price] => 483.43
    [price_backup] => 432.60
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 69
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1310 3 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 52 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252135
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705014795
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1310-3.5C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1310-3.5C

UPC00887753600387

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1310 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.

Price$535.81

Add to Cart

Array
(
    [id] => 77
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1310-3.5C
    [price] => 535.81
    [price_backup] => 481.01
    [subcategory] => 1
    [weight] => 25
    [orderNum] => 71
    [iedls_part_number] => 
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1310 3.5 in. aluminum driveshaft w/transmission yoke. use this with both manual and automatic overdrive transmissions. it can be up to 56 inches long u-joint c/l to c/l. Use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753600387
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705014865
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

58-64RS

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #58-64RS

UPC00887753252111

UseRear Shaft Kit

DescriptionAn "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It comes with the 7075-T6 Aluminum Bearing Support. The Rear Shaft Kit can be special order for trucks.

Applications1958 - 1964 Chevrolet Cars

Price$378.85

Add to Cart

Array
(
    [id] => 173
    [application] => Rear Shaft Kit
    [category] => 1
    [model_options] => 0
    [part_number] => 58-64RS
    [price] => 378.85
    [price_backup] => 339.90
    [subcategory] => 3
    [weight] => 22
    [orderNum] => 170
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_173.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1958 - 1964 Chevrolet Cars
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252111
    [d-2] => 
    [description] => An "All New", balanced Rear Shaft Section featuring a telescoping rear shaft to absorb axial motion caused by rear suspension movement. It comes with the 7075-T6 Aluminum Bearing Support. The Rear Shaft Kit can be special order for trucks.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705354815
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-31-20-CV

CategoryDriveshafts

SubcategoryOff-Road Driveshafts

Part #SK-31-20-CV

UPC00887753600424

UseChevrolet,Ford,GMC,Jeep

Description2" .120 wall 1310 CV Shaft Slip & Stub

Price$428.40

Add to Cart

Array
(
    [id] => 191
    [application] => Chevrolet,Ford,GMC,Jeep
    [category] => 1
    [model_options] => 0
    [part_number] => SK-31-20-CV
    [price] => 428.40
    [price_backup] => 360.50
    [subcategory] => 4
    [weight] => 0
    [orderNum] => 187
    [iedls_part_number] => SK-31-20-CV
    [photos] => [{"photo":"images/products/1310 CV 320X240.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753600424
    [d-2] => 
    [description] => 2" .120 wall 1310 CV Shaft Slip & Stub
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705094698
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Off-Road Driveshafts
)

SK-JK-1310CV

CategoryDriveshafts

SubcategoryOff-Road Driveshafts

Part #SK-JK-1310CV

UPC00887753600400

Use07-09 Jeep JK Wrangler Rear Shaft

DescriptionThis 1310 CV Shaft converts the Rzeppa CV joint to a double cardan Spicer style u-joint for longer travel, better strength and operating angle and ruduce vibration on lifted Jeeps.

Price$597.52

Add to Cart

Array
(
    [id] => 193
    [application] => 07-09 Jeep JK Wrangler Rear Shaft
    [category] => 1
    [model_options] => 0
    [part_number] => SK-JK-1310CV
    [price] => 597.52
    [price_backup] => 552.17
    [subcategory] => 4
    [weight] => 22
    [orderNum] => 189
    [iedls_part_number] => SK-JK-1310CV
    [photos] => [{"photo":"images/products/1310 CV 320X240.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753600400
    [d-2] => 
    [description] => This 1310 CV Shaft converts the Rzeppa CV joint to a double cardan Spicer style u-joint for longer travel, better strength and operating angle and ruduce vibration on lifted Jeeps.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705094740
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Off-Road Driveshafts
)

IE502

CategoryDriveshafts

Subcategory1958 - 64 Chevrolet Cars

Part #IE502

UseUpgraded Shaft Kit 502 Preformer Kit

DescriptionThese shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks. This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-^ Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.

Price$916.98

Add to Cart

Array
(
    [id] => 201
    [application] => Upgraded Shaft Kit 502 Preformer Kit
    [category] => 1
    [model_options] => 0
    [part_number] => IE502
    [price] => 916.98
    [price_backup] => 768.05
    [subcategory] => 11
    [weight] => 36
    [orderNum] => 197
    [iedls_part_number] => IE502
    [photos] => [{"photo":"images/custom shaft.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 1
    [a] => 
    [applications] => 
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => These shafts are perfect for Big Block powered Cruisers, Pro-Street, Air suspension equipped cars and trucks. This custom order shaft set includes: Big Spicer 1350 U-Joint, 1350 Trans Yoke, Larger diameter Tubes, 1.5" Forged Strub, 7075 T-^ Aluminum Bearing Mount with Larger Diameter Bearing Id, Telescopic Rear Shaft. The "502" Performer is balanced as a set for maximum smoothness. For 58 -64 Chevrolets.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705094781
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => 1958 - 64 Chevrolet Cars
)

58-64LR

CategoryDriveshafts

Subcategory1958 - 64 Chevrolet Cars

Part #58-64LR

Use58-64 Chevy and 58 to 72 Chevy and GMC Trucks

DescriptionThis "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.

Price$814.98

Add to Cart

Array
(
    [id] => 206
    [application] => 58-64 Chevy and 58 to 72 Chevy and GMC Trucks
    [category] => 1
    [model_options] => 0
    [part_number] => 58-64LR
    [price] => 814.98
    [price_backup] => 648.90
    [subcategory] => 11
    [weight] => 67
    [orderNum] => 202
    [iedls_part_number] => 
    [photos] => [{"photo":"images/complete replacement.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 1
    [a] => 
    [applications] => 
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This "All New" replacement two piece is the ultimate for restored, Modernized or Hydro and air suspension equipped '58 to '64 Chevy cars '58 to '72 Chevy and GMC Trucks. Our Polyurethane center support is coupled with a slipping member that takes the fore and aft loads generated by rear suspension movement off the center support allowing the shafts to run smoother.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705094911
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => 1958 - 64 Chevrolet Cars
)

alu-s10

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #alu-s10

UPC00887753252296

UseChevrolet S10 V6 Extra-cab

DescriptionThis one piece 4" aluminum shaft is made to replace the two piece cv shaft for the V6 extra cab S10 and GMC Sonoma. Some modification on cross member may be necessary

ApplicationsChevrolet S-10 and GMC Sonoma extra cab pick up trucks

Price$659.75

Add to Cart

Array
(
    [id] => 210
    [application] => Chevrolet S10 V6 Extra-cab
    [category] => 1
    [model_options] => 0
    [part_number] => alu-s10
    [price] => 659.75
    [price_backup] => 609.68
    [subcategory] => 3
    [weight] => 0
    [orderNum] => 206
    [iedls_part_number] => alu-s10
    [photos] => [{"photo":"products/img_210.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Chevrolet S-10 and GMC Sonoma extra cab pick up trucks
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252296
    [d-2] => 
    [description] => This one piece 4" aluminum shaft is made to replace the two piece cv shaft for the V6 extra cab S10 and GMC Sonoma. Some modification on cross member may be necessary
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705095054
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-33-35-83C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-33-35-83C

UPC00887753253217

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 3.5 in. 1330 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires.

Price$479.28

Add to Cart

Array
(
    [id] => 235
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => SK-33-35-83C
    [price] => 479.28
    [price_backup] => 442.90
    [subcategory] => 2
    [weight] => 25
    [orderNum] => 23
    [iedls_part_number] => SK-33-35-83C
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3.5 in. 1330 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253217
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095089
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-31-35-83C

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-31-35-83C

UPC00887753253200

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 3.5 in. 1310 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires.

Price$462.21

Add to Cart

Array
(
    [id] => 236
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 0
    [part_number] => SK-31-35-83C
    [price] => 462.21
    [price_backup] => 427.14
    [subcategory] => 2
    [weight] => 25
    [orderNum] => 22
    [iedls_part_number] => SK-31-35-83C
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 3.5 in. 1310 .083 wall steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. For use with up to 500 hp with street tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253200
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3.5 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095128
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-35-83CRC

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-35-83CRC

UPC00887753252807

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Chrome Moly Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

Applications1350 3.5" Chromoly custom 3.5in. .083 wall 1350 3.5" Chromoly steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. for more than 500 hp with any tires .

Price$768.31

Add to Cart

Array
(
    [id] => 237
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => SK-35-35-83CRC
    [price] => 768.31
    [price_backup] => 710.00
    [subcategory] => 2
    [weight] => 35
    [orderNum] => 230
    [iedls_part_number] => SK-35-35-83CRC
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" Chromoly 

custom 3.5in. .083 wall 1350 3.5" Chromoly steel driveshaft w/transmission yoke can be to 56 inches u-j c/l to c/l. for more than 500 hp with any tires .
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252807
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Chrome Moly Driveshaft W/ Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705095166
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

ALU-1350KP

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350KP

UPC00887753252265

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

Applications1350 3.5" POLISHED SHAFT WITH CHROME PLATED U-JOINTS.

Price$1152.17

Add to Cart

Array
(
    [id] => 238
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 0
    [part_number] => ALU-1350KP
    [price] => 1152.17
    [price_backup] => 1050.60
    [subcategory] => 1
    [weight] => 20
    [orderNum] => 234
    [iedls_part_number] => ALU-1350KP
    [photos] => [{"photo":"images/aluminum shaft.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 3.5" POLISHED SHAFT WITH CHROME PLATED U-JOINTS.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252265
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 3.5 In. Aluminum Driveshaft W/ Transmission Yoke. Polished with Chrome U-Joints. Use with Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095198
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

05-GTO

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #05-GTO

UPC00887753251701

Use2004 - 2006 GTO and Holden

Description1 Piece 3.5 Inch Aluminum Replacement Driveshaft 2004 to 2006 GTO and Holden; Includes New 1350 Pinion Yoke.

ApplicationsReplacement Driveshaft for 2004 to 2006 GTO and Holden

Price$795.19

Add to Cart

Array
(
    [id] => 249
    [application] => 2004 - 2006 GTO and Holden
    [category] => 1
    [model_options] => 0
    [part_number] => 05-GTO
    [price] => 795.19
    [price_backup] => 706.58
    [subcategory] => 3
    [weight] => 0
    [orderNum] => 245
    [iedls_part_number] => 05-GTO
    [photos] => [{"photo":"products/img_249.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Replacement Driveshaft for 2004 to 2006 GTO and Holden
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753251701
    [d-2] => 
    [description] => 1 Piece 3.5 Inch Aluminum Replacement Driveshaft 2004 to 2006 GTO and Holden; Includes New 1350 Pinion Yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705095234
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

MP-05

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #MP-05

UPC00887753252906

Use2005-2010 Mustang GT

DescriptionThis is a 4" Aluminum shaft to replace the heavy two piece steel shaft. No adapter is required.

Applications2005-2010 Ford Mustang GT V8

Price$1014.90

Add to Cart

Array
(
    [id] => 265
    [application] => 2005-2010 Mustang GT
    [category] => 1
    [model_options] => 0
    [part_number] => MP-05
    [price] => 1014.90
    [price_backup] => 746.75
    [subcategory] => 1
    [weight] => 21
    [orderNum] => 262
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_265.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 2005-2010 Ford Mustang GT V8
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252906
    [d-2] => 
    [description] => This is a 4" Aluminum shaft to replace the heavy two piece steel shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095280
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

MP-04

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #MP-04

UPC00887753252890

Use2005-2010 V-6

DescriptionThis is a single piece Aluminum shaft to replace the stock shaft. No adapter is required.

ApplicationsFord Mustang 2005-2010 V6

Price$808.08

Add to Cart

Array
(
    [id] => 266
    [application] => 2005-2010 V-6
    [category] => 1
    [model_options] => 0
    [part_number] => MP-04
    [price] => 808.08
    [price_backup] => 746.75
    [subcategory] => 1
    [weight] => 21
    [orderNum] => 261
    [iedls_part_number] => MP-04
    [photos] => [{"photo":"products/img_266.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang 2005-2010 V6
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252890
    [d-2] => 
    [description] => This is a single piece Aluminum shaft to replace the stock shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095322
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

SK-MP-08

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-MP-08

Use2005-2010 V8 GT

DescriptionThis is a Steel one piece Shaft 3.5" diameter to replace heavy two piece shaft

ApplicationsFord Mustang GT V8 2005-2010

Price$752.34

Add to Cart

Array
(
    [id] => 270
    [application] => 2005-2010 V8 GT
    [category] => 1
    [model_options] => 0
    [part_number] => SK-MP-08
    [price] => 752.34
    [price_backup] => 695.25
    [subcategory] => 2
    [weight] => 41
    [orderNum] => 266
    [iedls_part_number] => 
    [photos] => [{"photo":"products/MP7 8 SK 04 320.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang GT V8 2005-2010
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This is a Steel one piece Shaft 3.5" diameter to replace heavy two piece shaft
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705354838
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-MP-07

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-MP-07

Use2005-2010 GT500

DescriptionThis is a 3.5" Steel Shaft to replace the heavy two piece shaft.

ApplicationsFord Mustang GT500 2005-2010 V8

Price$752.34

Add to Cart

Array
(
    [id] => 271
    [application] => 2005-2010 GT500
    [category] => 1
    [model_options] => 0
    [part_number] => SK-MP-07
    [price] => 752.34
    [price_backup] => 695.25
    [subcategory] => 2
    [weight] => 41
    [orderNum] => 267
    [iedls_part_number] => 
    [photos] => [{"photo":"products/MP7 8 SK 04 320.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang GT500 2005-2010 V8
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This is a 3.5" Steel Shaft to replace the heavy two piece shaft.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095417
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

MP-06

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #MP-06

UPC00887753252913

Use2005-2010 V8 GT500

DescriptionThis is a single piece 4" Aluminum shaft to replace the heavy stock two piece shaft. No adapter is required.

ApplicationsFord Mustang GT 500 V8 2005-2010

Price$808.08

Add to Cart

Array
(
    [id] => 272
    [application] => 2005-2010 V8 GT500
    [category] => 1
    [model_options] => 0
    [part_number] => MP-06
    [price] => 808.08
    [price_backup] => 746.75
    [subcategory] => 1
    [weight] => 41
    [orderNum] => 268
    [iedls_part_number] => 
    [photos] => [{"photo":"products/img_272.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang GT 500 V8 2005-2010
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252913
    [d-2] => 
    [description] => This is a single piece 4" Aluminum shaft to replace the heavy stock two piece shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095482
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

SK-MP-04

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-MP-04

UPC00887753253378

UseAll V-6 Mustangs

DescriptionThis is a single piece Steel shaft to replace the stock steel shaft. No adapter is required.

ApplicationsFord Mustang 2005-2006 V6

Price$846.09

Add to Cart

Array
(
    [id] => 274
    [application] => All V-6 Mustangs
    [category] => 1
    [model_options] => 0
    [part_number] => SK-MP-04
    [price] => 846.09
    [price_backup] => 715.85
    [subcategory] => 2
    [weight] => 21
    [orderNum] => 269
    [iedls_part_number] => MP-04
    [photos] => [{"photo":"products/MP7 8 SK 04 320.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang 2005-2006 V6
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253378
    [d-2] => 
    [description] => This is a single piece Steel shaft to replace the stock steel shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095520
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

MP-05

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #MP-05

UPC00887753252906

Use2005-2010 GT Mustang

DescriptionThis is a 4" Aluminum shaft to replace the heavy two piece steel shaft. No adapter is required.

Applications2005-2010 Ford Mustang GT V8

Price$1014.90

Add to Cart

Array
(
    [id] => 275
    [application] => 2005-2010 GT Mustang
    [category] => 1
    [model_options] => 0
    [part_number] => MP-05
    [price] => 1014.90
    [price_backup] => 746.75
    [subcategory] => 3
    [weight] => 21
    [orderNum] => 270
    [iedls_part_number] => MP-05
    [photos] => [{"photo":"products/img_275.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 2005-2010 Ford Mustang GT V8
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252906
    [d-2] => 
    [description] => This is a 4" Aluminum shaft to replace the heavy two piece steel shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095554
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

MP-06

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #MP-06

Use2005-2010 Mustang GT-500

DescriptionThis is a single piece 4" Aluminum shaft to replace the heavy stock two piece shaft. No adapter is required.

ApplicationsFord Mustang GT-500 V8 2005-2010

Price$808.08

Add to Cart

Array
(
    [id] => 276
    [application] => 2005-2010 Mustang GT-500
    [category] => 1
    [model_options] => 0
    [part_number] => MP-06
    [price] => 808.08
    [price_backup] => 746.75
    [subcategory] => 3
    [weight] => 21
    [orderNum] => 271
    [iedls_part_number] => MP-06
    [photos] => [{"photo":"products/img_276.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Mustang GT-500 V8 2005-2010
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This is a single piece 4" Aluminum shaft to replace the heavy stock two piece shaft. No adapter is required.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705095590
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

F6769-350

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #F6769-350

UPC00887753252364

Use1967 to 1969 Firebird

Description3 inch aluminum shaft, stock length, includes transmission yoke.

ApplicationsFirebird 1967 to 1969 with TH-350

Price$468.13

Add to Cart

Array
(
    [id] => 279
    [application] => 1967 to 1969 Firebird 
    [category] => 1
    [model_options] => 
    [part_number] => F6769-350
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/3-inch aluminum.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Firebird 1967 to 1969 with TH-350
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252364
    [d-2] => 
    [description] => 3 inch aluminum shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310/3R
    [lastChange] => 1705095651
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

F6769-400

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #F6769-400

UPC00887753252371

Use1967 to 1969 Firebird with TH-400

Description3 inch aluminum shaft, stock length, includes transmission yoke.

Applications1967 to 1969 Firebird with TH-400

Price$468.13

Add to Cart

Array
(
    [id] => 280
    [application] => 1967 to 1969 Firebird with TH-400
    [category] => 1
    [model_options] => 
    [part_number] => F6769-400
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/3-inch aluminum.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Firebird with TH-400
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252371
    [d-2] => 
    [description] => 3 inch aluminum shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310/3R
    [lastChange] => 1705095684
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

F6769-4SPD

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #F6769-4SPD

UPC00887753252388

Use1967 to 1969 Firebird with 4 speed.

Description3 inch shaft, stock length, includes transmission yoke.

Applications1967 to 1969 Firebird with 4 speed transmission.

Price$468.13

Add to Cart

Array
(
    [id] => 281
    [application] => 1967 to 1969 Firebird with 4 speed. 
    [category] => 1
    [model_options] => 
    [part_number] => F6769-4SPD
    [price] => 468.13
    [price_backup] => 432.60
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/3-inch aluminum.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Firebird with 4 speed transmission.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252388
    [d-2] => 
    [description] => 3 inch shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310/3R
    [lastChange] => 1705095719
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

CF8200S

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #CF8200S

UPC00887753252357

Use82 to 2001 Camaro and Firebird

Description3 inch steel shaft, stock length, includes transmission yoke.

Applications1982 to 2001 Camaro and Firebird

Price$442.80

Add to Cart

Array
(
    [id] => 282
    [application] => 82 to 2001 Camaro and Firebird
    [category] => 1
    [model_options] => 
    [part_number] => CF8200S
    [price] => 442.80
    [price_backup] => 409.20
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1982 to 2001 Camaro and Firebird
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252357
    [d-2] => 
    [description] => 3 inch steel shaft, stock length, includes  transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705095757
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-F6769-350

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-F6769-350

UPC00887753253316

Use1967 TO 1969 Firebird with TH-350

Description3 inch steel shaft, stock length, includes transmission yoke.

Applications1967 to 1969 Firebird with TH-350

Price$442.80

Add to Cart

Array
(
    [id] => 283
    [application] => 1967 TO 1969 Firebird with TH-350
    [category] => 1
    [model_options] => 
    [part_number] => SK-F6769-350
    [price] => 442.80
    [price_backup] => 409.20
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Firebird with TH-350
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253316
    [d-2] => 
    [description] => 3 inch steel shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310/3R
    [lastChange] => 1705095796
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-C6769-400

CategoryDriveshafts

SubcategoryStock Replacement

Part #SK-C6769-400

UPC00887753253323

Use1967 to 1969 Firebird with TH-400

Description3 Inch steelm shaft, stock length, includes transmission yoke.

Applications197 to1969 Firebird with TH-400

Price$409.20

Add to Cart

Array
(
    [id] => 284
    [application] => 1967 to 1969 Firebird with TH-400
    [category] => 1
    [model_options] => 
    [part_number] => SK-C6769-400
    [price] => 409.20
    [price_backup] => 409.20
    [subcategory] => 14
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 197 to1969 Firebird with TH-400
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253323
    [d-2] => 
    [description] => 3 Inch steelm shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310/3R
    [lastChange] => 1705355131
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement
)

SK-6769-4SPD

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-6769-4SPD

UPC00887753253330

Use1967 to 1969 Firebird with 4 speed.

Description3 inch steel shaft, stock length, included transmission yoke.

Applications1967 to 1969 Firebird with 4 speed

Price$442.80

Add to Cart

Array
(
    [id] => 285
    [application] => 1967 to 1969 Firebird with 4 speed.
    [category] => 1
    [model_options] => 
    [part_number] => SK-6769-4SPD
    [price] => 442.80
    [price_backup] => 409.20
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Firebird with 4 speed
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253330
    [d-2] => 
    [description] => 3 inch steel shaft, stock length, included transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310/3R
    [lastChange] => 1705095922
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-C6769-4SPD

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-C6769-4SPD

UPC00887753253286

Use1967 to 1969 Camaro with 4 speed

Description3 inch steel shaft, stock length, includes transmission yoke.

Applications1967 to 1969 Camaro with 4 speed.

Price$425.77

Add to Cart

Array
(
    [id] => 286
    [application] => 1967 to 1969 Camaro with 4 speed
    [category] => 1
    [model_options] => 
    [part_number] => SK-C6769-4SPD
    [price] => 425.77
    [price_backup] => 409.20
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Camaro with 4 speed.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253286
    [d-2] => 
    [description] => 3 inch steel shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705096006
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-C6769-350

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-C6769-350

UPC00887753253293

Use1967 to 1969 Camaro with TH-350

Description3 inch steel shaft, stock length, includes transmission yoke.

Applications1967 to 1969 Camaro with TH-350.

Price$442.80

Add to Cart

Array
(
    [id] => 287
    [application] => 1967 to 1969 Camaro with TH-350
    [category] => 1
    [model_options] => 
    [part_number] => SK-C6769-350
    [price] => 442.80
    [price_backup] => 409.20
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Camaro with TH-350.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253293
    [d-2] => 
    [description] => 3 inch steel shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705096038
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-C6769-400

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-C6769-400

UPC00887753253309

Use1967 to 1969 Camaro with TH-400

Description3 inch steel shaft, stock length, includes transmission yoke.

Applications1967 to 1969 Camaro with TH-400

Price$442.80

Add to Cart

Array
(
    [id] => 288
    [application] => 1967 to 1969 Camaro with TH-400
    [category] => 1
    [model_options] => 
    [part_number] => SK-C6769-400
    [price] => 442.80
    [price_backup] => 409.20
    [subcategory] => 3
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1967 to 1969 Camaro with TH-400
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253309
    [d-2] => 
    [description] => 3 inch steel shaft, stock length, includes transmission yoke.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705096071
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

ALU-1350

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350

UPC00887753252197

UseOVER 500 HP can carry SFI sticker

DescriptionCustom 1350 3.5 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsThis shaft uses customer's transmission yoke.

Price$550.61

Add to Cart

Array
(
    [id] => 294
    [application] => OVER 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1350
    [price] => 550.61
    [price_backup] => 508.82
    [subcategory] => 1
    [weight] => 17
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => This shaft uses customer's transmission yoke.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252197
    [d-2] => 
    [description] => Custom 1350 3.5 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705096115
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1350-4

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350-4

UPC00887753252210

UseOver 500 HP can carry SFI sticker

DescriptionCustom 1350 4 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsThis shaft uses Customer's transmission yoke.

Price$591.17

Add to Cart

Array
(
    [id] => 295
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1350-4
    [price] => 591.17
    [price_backup] => 546.31
    [subcategory] => 1
    [weight] => 15
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => This shaft uses Customer's transmission yoke.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252210
    [d-2] => 
    [description] => Custom 1350 4 In. Aluminum Driveshaft with No Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705096186
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1350-4CQ

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350-4CQ

UPC00887753252197

UseOver 500 HP can carry SFI sticker

DescriptionCustom 1350 4 In. Aluminum Driveshaft W/ Forged Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsCUSTOM 1350 4in. ALUMINUM WITH CHROMOLY TRANS. YOKE

Price$733.97

Add to Cart

Array
(
    [id] => 296
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1350-4CQ
    [price] => 733.97
    [price_backup] => 0.00
    [subcategory] => 1
    [weight] => 20
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/1350 Shaft QC.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => CUSTOM 1350 4in. ALUMINUM WITH CHROMOLY TRANS. YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252197
    [d-2] => 
    [description] => Custom 1350 4 In. Aluminum Driveshaft W/ Forged Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705354966
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

IED-ALU-3R-3.5C

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #IED-ALU-3R-3.5C

UPC00887753252654

Use500 HP and Lower

DescriptionCustom 3.5 In. Aluminum 3R Driveshaft W/3R Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for Up to 500 HP with Street Tires

ApplicationsGM 3R Series u-joints with inside clip rings.

Price$585.15

Add to Cart

Array
(
    [id] => 297
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 
    [part_number] => IED-ALU-3R-3.5C
    [price] => 585.15
    [price_backup] => 0.00
    [subcategory] => 1
    [weight] => 15
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/products/img_15.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => GM 3R Series u-joints with inside clip rings.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252654
    [d-2] => 
    [description] => Custom 3.5 In. Aluminum 3R Driveshaft W/3R Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for Up to 500 HP with Street Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 3R
    [lastChange] => 1705354943
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

IED-ALUCAMARO1350

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #IED-ALUCAMARO1350

UPC00887753252647

UseOVER 500 HP

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsCustom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

Price$611.60

Add to Cart

Array
(
    [id] => 298
    [application] => OVER 500 HP
    [category] => 1
    [model_options] => 
    [part_number] => IED-ALUCAMARO1350
    [price] => 611.60
    [price_backup] => 653.32
    [subcategory] => 1
    [weight] => 17
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/products/img_21.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252647
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 In. 3.5 In. Aluminum Driveshaft W/ Transmission Yoke for Camaro. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705354993
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

SK-GN

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-GN

UPC00887753253347

Use81/87 Buick Grand National Steel Shaft with Transmission Yoke

DescriptionFor 1981-87 Buick Grand National. This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. 81/87 Buick Grand National Steel Shaft with Transmission Yoke

Applications81/87 Buick Grand National Steel Shaft with Transmission Yoke

Price$507.73

Add to Cart

Array
(
    [id] => 299
    [application] => 81/87 Buick Grand National Steel Shaft with Transmission Yoke
    [category] => 1
    [model_options] => 
    [part_number] => SK-GN
    [price] => 507.73
    [price_backup] => 446.69
    [subcategory] => 3
    [weight] => 28
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 81/87 Buick Grand National Steel Shaft with Transmission Yoke
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253347
    [d-2] => 
    [description] => For 1981-87 Buick Grand National. This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. 81/87 Buick Grand National Steel Shaft with Transmission Yoke
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705096396
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-IC9496C

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-IC9496C

UPC00887753253354

Use94/96 Impala and Caprice Steel Shaft Stock Length

DescriptionFor 1994-96 Impala and Caprice. This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. 94/96 Impala and Caprice Steel Shaft Stock Length

Applications94/96 Impala and Caprice Steel Shaft Stock Length

Price$507.73

Add to Cart

Array
(
    [id] => 300
    [application] => 94/96 Impala and Caprice Steel Shaft Stock Length
    [category] => 1
    [model_options] => 
    [part_number] => SK-IC9496C
    [price] => 507.73
    [price_backup] => 469.19
    [subcategory] => 3
    [weight] => 28
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 94/96 Impala and Caprice Steel Shaft Stock Length
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253354
    [d-2] => 
    [description] => For 1994-96 Impala and Caprice. This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. 94/96 Impala and Caprice Steel Shaft Stock Length
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705096435
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

SK-IC9496D

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #SK-IC9496D

UPC00887753253361

Use94/96 Impala and Caprice Steel Shaft 1/2In. Longer for Use with Aftermarket Trailing Arms

DescriptionFor 1994-96 Impala and Caprice. This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. 94/96 Impala and Caprice Steel Shaft 1/2In. Longer for Use with Aftermarket Trailing Arms

Applications94/96 Impala and Caprice Steel Shaft 1/2In. Longer for Use with Aftermarket Trailing Arms

Price$507.73

Add to Cart

Array
(
    [id] => 301
    [application] => 94/96 Impala and Caprice Steel Shaft 1/2In. Longer for Use with Aftermarket Trailing Arms
    [category] => 1
    [model_options] => 
    [part_number] => SK-IC9496D
    [price] => 507.73
    [price_backup] => 469.19
    [subcategory] => 3
    [weight] => 28
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 94/96 Impala and Caprice Steel Shaft 1/2In. Longer for Use with Aftermarket Trailing Arms
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253361
    [d-2] => 
    [description] => For 1994-96 Impala and Caprice. This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. 94/96 Impala and Caprice Steel Shaft 1/2In. Longer for Use with Aftermarket Trailing Arms
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705096474
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

ALU-1310

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1310

UPC00887753252616

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Cutomer Suppliedt Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1310 Aluminum 3 Inch Driveshaft with Customer Supplied Transmission Yoke

Price$417.98

Add to Cart

Array
(
    [id] => 311
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1310
    [price] => 417.98
    [price_backup] => 0.00
    [subcategory] => 1
    [weight] => 13
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1310 Aluminum 3 Inch Driveshaft with Customer Supplied Transmission Yoke
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252616
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Cutomer Suppliedt Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705096512
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

IED-FORD-LIGHTNING

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #IED-FORD-LIGHTNING

UPC00887753252678

UseFord Lightening Pick Up Triucks

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Ford Lightning Driveshaft. Stock Replacement Aluminum Drive Shaft Built to the Measurements Provided on Our How to Measure for Driveshafts Form.

ApplicationsFord Lightning Driveshaft. Stock Replacement Aluminum Drive Shaft Built to the Measurements Provided on Our How to Measure for Driveshafts Form.

Price$874.02

Add to Cart

Array
(
    [id] => 313
    [application] => Ford Lightening Pick Up Triucks
    [category] => 1
    [model_options] => 
    [part_number] => IED-FORD-LIGHTNING
    [price] => 874.02
    [price_backup] => 0.00
    [subcategory] => 3
    [weight] => 0
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 0
    [custom_two_piece] => 0
    [a] => 
    [applications] => Ford Lightning Driveshaft. Stock Replacement Aluminum Drive Shaft Built to the Measurements Provided on Our How to Measure for Driveshafts Form.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252678
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Ford Lightning Driveshaft. Stock Replacement Aluminum Drive Shaft Built to the Measurements Provided on Our How to Measure for Driveshafts Form.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705355011
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

ALU-4X5

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-4X5

UPC00887753252272

Use5in. Diameter custom aluminum shaft

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 or 1330 5 In. Aluminum Driveshaft Customer Supplied Transmission Yoke Can Be Up to 70 Inches Long U-Joint C/L to C/L. Use 1330 Up to 500 HP with Tires and 1350 Above Above 500 HP with Any Tires.

Applications5in. Diameter custom aluminum shaft

Price$712.89

Add to Cart

Array
(
    [id] => 318
    [application] => 5in. Diameter custom aluminum shaft
    [category] => 1
    [model_options] => 
    [part_number] => ALU-4X5
    [price] => 712.89
    [price_backup] => 658.79
    [subcategory] => 1
    [weight] => 22
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 5in. Diameter custom aluminum shaft
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252272
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 or 1330 5 In. Aluminum Driveshaft Customer Supplied Transmission Yoke Can Be Up to 70 Inches Long U-Joint C/L to C/L. Use 1330 Up to 500 HP with Tires and 1350 Above Above 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1330 or 1350
    [lastChange] => 1705096616
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

SK-35-30-95CRC

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-95CRC

UPC00887753253248

UseOver 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/TRANS YOKE

Price$681.74

Add to Cart

Array
(
    [id] => 323
    [application] => Over 500 HP  can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => SK-35-30-95CRC
    [price] => 681.74
    [price_backup] => 630.00
    [subcategory] => 2
    [weight] => 24
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => CUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/TRANS YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753253248
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705096656
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

ALU-1330

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1330

UPC00887753252159

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Supplied transmission yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1330 4 in. Diameter Aluminum Driveshaft with Customer Supplied Trans. Yoke

Price$585.39

Add to Cart

Array
(
    [id] => 327
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1330
    [price] => 585.39
    [price_backup] => 540.96
    [subcategory] => 1
    [weight] => 16
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1330 4 in. Diameter Aluminum Driveshaft with Customer Supplied Trans. Yoke
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252159
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Supplied transmission yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1330 4 In. Aluminum Driveshaft with Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1330
    [lastChange] => 1705096703
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1330-3.5

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1330-3.5

UPC00887753252166

Use500 HP and Lower

DescriptionCustom 1330 3.5 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1330 3.5 in. Diameter Aluminum Shaft with Customer Supplied Transmission Yoke.

Price$550.61

Add to Cart

Array
(
    [id] => 328
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1330-3.5
    [price] => 550.61
    [price_backup] => 508.82
    [subcategory] => 1
    [weight] => 15
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1330  3.5 in. Diameter Aluminum Shaft with Customer Supplied Transmission Yoke.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252166
    [d-2] => 
    [description] => Custom 1330 3.5 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1330
    [lastChange] => 1705096747
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1350-CQ

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350-CQ

UPC00887753252258

UseOver 500 HP can carry SFI sticker

DescriptionCustom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

ApplicationsCustom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

Price$739.50

Add to Cart

Array
(
    [id] => 330
    [application] => Over 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1350-CQ
    [price] => 739.50
    [price_backup] => 628.30
    [subcategory] => 1
    [weight] => 20
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/1350 Shaft QC.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252258
    [d-2] => 
    [description] => Custom 1350 3.5 In. Aluminum Driveshaft W/ Forged Transmission Yoke for roller bearing. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 56 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705355047
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1310-3.5

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1310-3.5

UPC00887753252623

Use500 HP and Lower

DescriptionThis Shaft is Hand Made to Order Using the Customer's Transmission Yoke. It is Built Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer's Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

ApplicationsCustom 1310 3.5 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.

Price$480.49

Add to Cart

Array
(
    [id] => 331
    [application] => 500 HP and Lower
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1310-3.5
    [price] => 480.49
    [price_backup] => 471.27
    [subcategory] => 1
    [weight] => 16
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Custom 1310 3.5 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252623
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Customer's Transmission Yoke. It is Built Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer's Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1310 3 In. Aluminum Driveshaft Using Customer Supplied Trans Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 52 Inches Long U-Joint C/L to C/L. Use with Up to 500 HP with Street Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705096858
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

ALU-1350-4

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350-4

UPC00887753252203

UseOVER 500 HP

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.

Applications1350 Series, 4" diameter with Customer Supplied Trans. Yoke

Price$591.17

Add to Cart

Array
(
    [id] => 335
    [application] => OVER 500 HP
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1350-4
    [price] => 591.17
    [price_backup] => 546.31
    [subcategory] => 1
    [weight] => 15
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => []
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1350 Series, 4" diameter with Customer Supplied Trans. Yoke
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252203
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 1350 4 In. Aluminum Driveshaft with Customer Supplied Transmission Yoke. Use This with Both Manual and Automatic Overdrive Transmissions. It Can Be Up to 60 Inches Long U-Joint C/L to C/L. Use with Over 500 HP with Any Tires.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705096980
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

IED-D15004X4-FS

CategoryDriveshafts

SubcategoryStock Replacement Driveshafts

Part #IED-D15004X4-FS

UPC00887753252661

UseDodge 1500 4X4 Frint

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Dodge 1500 4X4 Front Shaft fits a 2002 to 2011 Dodge Ram. Custom Steel Drive Shaft Built to the Measurements Provided on Our How to Measure for Driveshafts Form.

ApplicationsFront shaft replacement for Dodge 4X4

Price$648.19

Add to Cart

Array
(
    [id] => 338
    [application] => Dodge 1500 4X4 Frint
    [category] => 1
    [model_options] => 
    [part_number] => IED-D15004X4-FS
    [price] => 648.19
    [price_backup] => 551.05
    [subcategory] => 3
    [weight] => 35
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/Dodge Front Shaft 320.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => Front shaft replacement for Dodge 4X4
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252661
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Dodge 1500 4X4 Front Shaft fits a 2002 to 2011 Dodge Ram. Custom Steel Drive Shaft Built to the Measurements Provided on Our How to Measure for Driveshafts Form.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705097602
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Stock Replacement Driveshafts
)

IED-SK-31-20-SLI

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK-31-20-SLI

UPC00887753252784

Use1310 2

DescriptionThis 2 Inch Diameter Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission End U-Joint. The Assembly is Balanced and Shipped Ready to Install.

Applications1310 2" Slip Shaft Built To Length. Note that maximum length is dependant on RPM.

Price$362.23

Add to Cart

Array
(
    [id] => 339
    [application] => 1310 2 
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK-31-20-SLI
    [price] => 362.23
    [price_backup] => 334.76
    [subcategory] => 2
    [weight] => 16
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/58-64 chevy.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 1310 2" Slip Shaft Built To Length. 
Note that maximum length is dependant on RPM.
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252784
    [d-2] => 
    [description] => This 2 Inch Diameter Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission End U-Joint. The Assembly is Balanced and Shipped Ready to Install.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310
    [lastChange] => 1705097642
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IED-SK35-35-83CR

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK35-35-83CR

UPC00887753252807

UseOver 500 HP

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Provided Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Applications3.5" CHROMOLY SHAFT 1350 WITH CUSTOMER SUPPLIED TRANSMISSION YOKE YOKE

Price$692.03

Add to Cart

Array
(
    [id] => 341
    [application] => Over 500 HP
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK35-35-83CR
    [price] => 692.03
    [price_backup] => 639.51
    [subcategory] => 2
    [weight] => 25
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/IED-SK-35-35-CR 320.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 3.5" CHROMOLY SHAFT 1350 WITH CUSTOMER SUPPLIED TRANSMISSION YOKE YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252807
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Customer Provided Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705355157
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

IED-SK353583CRC

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #IED-SK353583CRC

UPC00887753252814

UseOVER 500 HP

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

Applications3.5" CHROMOLY SHAFT 1350 WITH YOKE

Price$768.31

Add to Cart

Array
(
    [id] => 342
    [application] => OVER 500 HP
    [category] => 1
    [model_options] => 
    [part_number] => IED-SK353583CRC
    [price] => 768.31
    [price_backup] => 710.00
    [subcategory] => 2
    [weight] => 32
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/custom steel.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 3.5" CHROMOLY SHAFT 1350 WITH YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753252814
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and Correct Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3.5 In. 1350 .083 Wall Chrome Moly Steel Driveshaft Customer Supplied Transmission Yoke Can Be to 56 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705355190
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

SK-35-30-95CR

CategoryDriveshafts

SubcategoryCustom Steel Driveshafts

Part #SK-35-30-95CR

UseOVER 500 HP can carry SFI sticker

DescriptionThis Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and CUstomer Supplied Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires

ApplicationsCUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/CUSTOMER SUPPLIED TRANS YOKE

Price$556.18

Add to Cart

Array
(
    [id] => 343
    [application] => OVER 500 HP can carry SFI sticker
    [category] => 1
    [model_options] => 
    [part_number] => SK-35-30-95CR
    [price] => 556.18
    [price_backup] => 0.00
    [subcategory] => 2
    [weight] => 0
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"images/SK-35-30-83CR 320.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => CUSTOM 3in. 1350 .083 WALL CHROMOLY DRIVESHAFT W/CUSTOMER SUPPLIED TRANS YOKE
    [centerline_to_end] => 
    [d] => 
    [d-1] => 
    [d-2] => 
    [description] => This Shaft is Hand Made to Order Using the Measurements Provided on Our How to Measure for Drive Shafts Form. It Includes the Correct Pinion U-Joint, the Shaft, Transmission U-Joint and CUstomer Supplied Transmission Yoke. The Assembly is Balanced and Shipped Ready to Install. Custom 3 In. 1350 .095 Wall Chrome Moly Steel Driveshaft with Transmission Yoke Can Be to 52 Inches U-J C/L to C/L. Use for More Than 500 HP with Any Tires
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1350
    [lastChange] => 1705097866
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Steel Driveshafts
)

ALU-1350-SLIP-3P

CategoryDriveshafts

SubcategoryCustom Aluminum Driveshafts

Part #ALU-1350-SLIP-3P

UPC00887753600394

UseThe use of the TR6060 and 6L80E

DescriptionThis is 3 1/2" diameter 1350 Aluminum Driveshaft, is Custom Made to Your Specifications (Measurements Needed). Not to Exceed 60" Center to Center of U-Joints. (If Needed Made Longer Please Call). The Driveshaft is Made for the Use of the TR6060 and 6L80E. 3Prong Transmissions Fixed Yoke. The Driveshaft Has Slip Built into it to Allow for Movement.

ApplicationsThe use of the TR6060 and 6L80E

Price$1525.79

Add to Cart

Array
(
    [id] => 345
    [application] => The use of the TR6060 and 6L80E
    [category] => 1
    [model_options] => 
    [part_number] => ALU-1350-SLIP-3P
    [price] => 1525.79
    [price_backup] => 1410.00
    [subcategory] => 1
    [weight] => 18
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"ALU-1350-SLIP-3P.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => The use of the TR6060 and 6L80E
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753600394
    [d-2] => 
    [description] => This is 3 1/2" diameter 1350 Aluminum Driveshaft, is Custom Made to Your Specifications (Measurements Needed). Not to Exceed 60" Center to Center of U-Joints. (If Needed Made Longer Please Call). The Driveshaft is Made for the Use of the TR6060 and 6L80E. 3Prong Transmissions Fixed Yoke. The Driveshaft Has Slip Built into it to Allow for Movement.
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 
    [lastChange] => 1705097898
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Custom Aluminum Driveshafts
)

SK-JK-1310CV-F

CategoryDriveshafts

SubcategoryOff-Road Driveshafts

Part #SK-JK-1310CV-F

UPC00887753600417

Use2007-2020 JEEP JK/JL WRANGLER

DescriptionThis is for 1310 CV Shaft converts the Rzeppa CV joint to a double cardan Spicer style u-joint for longer travel, better strength and operating angle and reduce vibration on lifted Jeeps. ***May require measurements***

Applications2007-2020 JEEP JK/JL WRANGLER. 2 DOOR AND 4-DOOR

Price$576.30

Add to Cart

Array
(
    [id] => 378
    [application] => 2007-2020 JEEP JK/JL WRANGLER
    [category] => 1
    [model_options] => 
    [part_number] => SK-JK-1310CV-F
    [price] => 576.30
    [price_backup] => 
    [subcategory] => 4
    [weight] => 22
    [orderNum] => 
    [iedls_part_number] => 
    [photos] => [{"photo":"SK-JK-1310CV-F.jpg"}]
    [custom_one_piece] => 1
    [custom_two_piece] => 0
    [a] => 
    [applications] => 2007-2020 JEEP JK/JL  WRANGLER. 2 DOOR AND 4-DOOR
    [centerline_to_end] => 
    [d] => 
    [d-1] => 00887753600417
    [d-2] => 
    [description] => This is for 1310 CV Shaft converts the Rzeppa CV joint to a double cardan Spicer style u-joint for longer travel, better strength and operating angle and reduce vibration on lifted Jeeps.
***May require measurements***
    [e] => 
    [e-1] => 
    [e-2] => 
    [ground_hub_diameter] => 
    [major_spline_diameter] => 
    [spine_count] => 
    [u-joint_series] => 1310 
    [lastChange] => 1705355213
    [lastChangeUser] => 88
    [categoryName] => Driveshafts
    [subcategoryName] => Off-Road Driveshafts
)

Driveshafts

CF 6769-350

CF6769-400

CF 6769-4SPD

CF 8200

IC 94-96C

ALUGN

SK-31-31-83C

SK-35-30-83C

SK-35-30-95C

SK-35-30-83CRC

SK-35-35-83C

SK-35-35-65C

IC 94-96D

58-64 LR

IE 502

58-64 RSNB

ALU-1310KP

ALU-1330-3.5C

ALU-1330-C

ALU-1350C

ALU-1350-4-C

ALU-1310-C

ALU-1310-3.5C

58-64RS

SK-31-20-CV

SK-JK-1310CV

IE502

58-64LR

alu-s10

SK-33-35-83C

SK-31-35-83C

SK-35-35-83CRC

ALU-1350KP

05-GTO

MP-05

MP-04

SK-MP-08

SK-MP-07

MP-06

SK-MP-04

MP-05

MP-06

F6769-350

F6769-400

F6769-4SPD

CF8200S

SK-F6769-350

SK-C6769-400

SK-6769-4SPD

SK-C6769-4SPD

SK-C6769-350

SK-C6769-400

ALU-1350

ALU-1350-4

ALU-1350-4CQ

IED-ALU-3R-3.5C

IED-ALUCAMARO1350

SK-GN

SK-IC9496C

SK-IC9496D

ALU-1310

IED-FORD-LIGHTNING

ALU-4X5

SK-35-30-95CRC

ALU-1330

ALU-1330-3.5

ALU-1350-CQ

ALU-1310-3.5

ALU-1350-4

IED-D15004X4-FS

IED-SK-31-20-SLI

IED-SK35-35-83CR

IED-SK353583CRC

SK-35-30-95CR

ALU-1350-SLIP-3P

SK-JK-1310CV-F

Why choose Inland Empire Drive Line for your driveshaft?

Measuring & Ordering Made Easy

Certified Driveshafts